PEmicro Cyclone Universal User Manual Download Page 9

Page: 9 / 71

Cyclone Universal & Cyclone Universal FX - User Manual

Multiple

SAP Images

Cyclone Universal

• Onboard flash memory stores up to 8 images.

• Images for different architectures can co-exist.

Multiple Memory

Modules In One

SAP Image

Cyclone Universal

• Supports multiple programming algorithms

for internal or external memory modules
such as EEPROM and Flash.

Automatic Serial

Number Mechanism

Cyclone Universal

• Supports serial number programming and

automatic incrementing

• Supports multiple serial number structures

within each SAP Image.

Powerful

Automated Control

Package for

Production Control

Cyclone Universal

• Basic Automated Control Package (included)

supports host-controlled SAP operations for one
Cyclone.

•

Professional

and

Enterprise

editions of Automated

Control Packages available for purchase.

• Multiple Cyclones can create a Gang Programmer

using a variety of different communication
interfaces.

• Different SAP Images on different Cyclones can

execute simultaneously.

Versatile

Programming

Software

Cyclone Universal

• Free image creation utility, image management

utility, and IP configuration utility

Convenient

LED Display

Cyclone Universal

• Indicates success or failure

Real-Time Clock

Cyclone Universal

• System clock with battery backup, can be

configured to display time and date on the main
screen.

• Time zone can be configured and time can be

updated from the internet.

Production

Environment Ready

Cyclone Universal

• Cyclones feature voltage protection technology.

Cyclone Universal & Cyclone Universal

Features

Summary of Contents for Cyclone Universal








































































Search results

Summary of Contents for Cyclone Universal

Reviews:

Related manuals for Cyclone Universal

Brands by name

Popular brands

PEmicro Cyclone Universal, User Manual

Search results

Summary of Contents for Cyclone Universal

Reviews:

Related manuals for Cyclone Universal

Brands by name

Popular brands