Cyclone Universal & Cyclone Universal FX - User Manual
25
4.2.1
Select Programming Image
Displays a list of the available programming images so that the user may select one for
programming. Images in the Cyclone’s internal memory are preceded by the designation
“IN”
and
numbered sequentially, i.e.,
IN1:
first image name
,
IN2:
second image name
. For the
Cyclone
Universal
FX
, or if the SDHC port has been activated, any programming images that reside on an
SD card that is installed in the Cyclone will be preceded by the designation
“EX”
in similar fashion.
You may tap the appropriate image to select it. The image name shown is the one specified in the
Cyclone configuration utility when saving the image to the Cyclone/SD card.
4.2.2
Current Image Options
This menu presents options that allow the user to select or configure programming images on the
Cyclone.
4.2.2.1
Execute Image Function
Execute Specific SAP Function presents four Stand-Alone Programming functions that you may
execute by tapping the function that you wish to execute:
4.2.2.1.1 Launch Programming
This allows the user to execute the programming function. The Cyclone will program the target
device, if able, using the currently selected programming image. This is functionally equivalent to
pressing the Start button.
4.2.2.1.2 Verify Data In Target
Performs a verify function on the data that has been programmed into the target device.
4.2.2.1.3 Toggle Power
Toggles the target power and makes sure all ports are driven to debug mode level.
4.2.2.1.4 Toggle Power, Let Device Run
Toggles the target power and maintains tri-state mode for all signals.
4.2.2.1.5 Validate Image CRC32
Allows the user to perform a CRC32 validation on the currently selected programming image.
4.2.2.2
Set Image Validation
Allows the user to choose between two validation settings: 1) validate the image each time the
Start button is pressed, or 2) do not validate the image.
4.2.2.3
Modify Next Serial Number
Presents options that display the current serial number and allow the user to increase or decrease
the next serial number. Tap “Current Image ID Selected” to view/choose the desired programming
image; tap “Current Alg ID Selected” to view/choose the desired programming algorithm; use
“Current CS ID Selected” to view/choose the desired Choose Serial file. The adjustment buttons
will display “Increase Not Allowed” and “Decrease Not Allowed” if the image/algorithm/CS files that
the user has selected to do not allow for this operation.
4.2.2.4
Show Current Image Stats
(FX Only)
Displays current statistics, if any, for Image Programmed Count & Maximum Allowed, Errors
Logged & Maximum Allowed, and Date Range Allowed. These limits can be set in the Image
Creation Utility when using the
Cyclone Universal
FX
.
Note:
When
Current Image Stats
is displayed as a home screen item, only Image Programmed
Count & Maximum Allowed are displayed on the home screen.
