Cyclone Universal & Cyclone Universal FX - User Manual
28
accuracy of the touch function. Follow the on-screen instructions.
4.2.3.3.3 Set Progress Details
This configures the display to present more detailed information during the progress of
programming, including the specific programming steps that are performed and specific
information about the programming and verifying procedure. The user may select “Show Details,
Last ON,” “Show Progress Details,” or “Hide Progress Details.”
4.2.3.3.4 Configure Home Screen
This menu allows you to choose what information to display on Lines 2-8 of the home screen.
Available elements to display consist if information such as: the current IP address, the Cyclone
name, the number of images, etc. In this way the user can customize the display to provide the
information that they find most useful. There is a separate button for each of Lines 2-8. Tapping on
the button for a specific Line brings up a list of elements that you can choose to display on that
Line of the home screen. If the list of elements is greater than one page, tap the More button to
view the rest of the available elements. Tap the element that you want to display on that line and
then tap Done to save your selection.
Note:
The
Cyclone Universal
FX
allows one additional option for display: the target device’s
voltage and/or current.
4.2.3.4
Configure Storage
This menu selection allows the user to format the Cyclone’s internal memory. If using the
Cyclone
Universal
FX
, this menu will also allow the user to format an SD card located in the Cyclone’s
memory expansion slot. Select “Format Internal Storage” or “Format External SD Card“ (
Cyclone
Universal
FX
only). The user will be prompted to ensure that they wish to format the
corresponding memory. Tap “Yes” to format, or “Cancel” to go back to the previous menu option
without formatting the memory.
4.2.3.5
Configure AUX Button
Allows the user to configure an auxiliary (AUX) button which (if configured) will be labeled
appropriately and displayed to the left of the Menu button on the Cyclone’s touchscreen LCD.
When pressed, the AUX button will perform the task for which it has been configured. The options
that may be assigned to the AUX button are:
1. No Operation - No operation is assigned to the AUX button and it will not be displayed on
the LCD screen.
2. Perform Verify Only - Verifies the data on the target device against the data in the pro-
gramming image.
3. Toggle Power - Toggles the Cyclones power relays off/on.
4. Validate Image CRC32 - Validates the CRC32 of the data on the target device against that
of the data in the programming image.
5. Toggle Power with no debug (Run Device) - Toggles the target power and maintains tri-
state mode for all signals.
4.2.4
Status
This menu contains a selection that allow the user to view status information regarding various
aspects of the Cyclone. This menu will likely be expanded with future updates.
4.2.4.1
Show Current IP Settings
Allows the user to view the Cyclone’s IP address, Mask, Gateway, and MAC Address.
