background image

#500964-001 - 

Product Manual: Model #SB-SM1 Fall Arrest Tower Base

 - Revision 01 - Date: 03-04-2010

Page 6

1.2 - Pelsue Product Warranty

PELSUE FALL ARREST/ RETRIEVAL PRODUCT WARRANTY

•  Pelsue products are designed and engineered to perform as stated in published specifications. Quality 

materials and workmanship are used in the manufacture of this product. With regular maintenance and 

proper care, Pelsue equipment provides many trouble free hours of operation.

•  The T.A. Pelsue Company warrants to the buyer that material furnished will conform to specifications 

and will be free from defects in material and workmanship from the date of shipment to the original 

buyer, for the period listed by product description at the bottom of this warranty statement. 

•  In the event of failure of any components of a Pelsue product within the warranty period, service must 

be pre-approved by the T.A. Pelsue Company and service must be performed by the T.A. Pelsue Com-

pany Parts and Service Department in Englewood Colorado, or at the option of T.A. Pelsue Company, 

service may be performed at any designated service center, which may include any authorized service 

center for the component manufacture.

•  Damage or failure due to misuse, mishandling, or unauthorized modifications will not be covered by 

this warranty. Unless otherwise agreed, the T.A. Pelsue Company shall repair or replace the defective 

components within (30) calendar days of notice of failure. T.A. Pelsue Company’s obligation hereun-

der, shall be limited to the repair or replacement of the product or component as set forth above, and 

shall not include any liability whatsoever for damages caused by such failure, including but not limited 

to consequential or incidental damages flowing from use or lack of use of product.

•  Any replacement, repair, modification, installation or other service performed by the T.A. Pelsue Com

-

pany shall be warranted by the remainder of the unexpired period of the warranty, or for a period of (90) 

calendar days, whichever is longer.

•  All materials or parts returned for credit or warranty shall be returned only with prior approval, and will 

be subject to factory inspection before credit is allowed. Parts claimed defective will be replaced upon 

request and will be invoiced as purchased, subject to credit when the parts claimed to be defective 

have been received and examined by the factory.

•  This warranty is expressly in lieu of all other warranties expressed or implied, including any warranties 

of merchantability or warranties of fitness for any particular use and all other obligations or liabilities in 

connection with the sale of this equipment. 

 

Product Description                                      

 

   

 Warranty Coverage*

 

• Davits and Bases, Life Guard Systems, Fall Arrest Towers,................ 1 year

 

  Hitch Mounts, Mounting Sleeves

 

• Winches................................................................................................ 1 year 

 

• Winch Cable and Rope (not including standard wear and................... 3 months

 

   tear or misuse or improper storage) 

 

 

 

 

 

 

 

 

 

• Rope..................................................................................................... 3 months

 

• Pelsue Painted or Plated Surfaces....................................................... 1 year 

*From date of shipment to original buyer.

T.A. Pelsue Company, 2500 South Tejon Street, Englewood, Colorado 80110, 800-525-8460

Summary of Contents for 500964-001





















Reviews: