#500964-001 -
Product Manual: Model #SB-SM1 Fall Arrest Tower Base
- Revision 01 - Date: 03-04-2010
Page 10
SAFETY ALERT SYMBOL
This Safety Alert symbol means
ATTeNTION! BeCOMe
AlerT! yOur SAFeTy IS INVOlVeD!
The Safety Alert symbol identifies important safety messages
on your Pelsue Retrieval Product and in the manual. When
you see this symbol, be alert to the possibility of personal
injury or death. Follow the instruction in the safety mes-
sage.
Why is this symbol important to you?
3 BIG Reasons:
Accidents Disable and Kill.
Accidents Cost you Money.
Accidents Can Be Avoided.
4.2 - Safety Alert Symbol
4.3 - General Safety Information
1. Read, understand, and follow the Product Manual and all safety signs before using, maintaining or inspecting the
equipment.
2. Refer to and follow applicable standards and regulations. Comply with requirements of local regulations for your
applications.
3. Establish an equipment-use training program for inexperienced employees. Only trained, competent persons shall
use the equipment. An untrained operator is not qualified to operate the system.
4. Have a first-aid kit available for use should the need arise and know how to use it.
5. Provide a fire extinguisher for use in case of an accident. Store in a highly visible place.
6. Install and properly secure all guards and shields before operating.
7. Wear appropriate protective gear. This list includes but is not limited to:
• A hard hat
• Protective shoes with slip resistant soles
• Heavy gloves
• Protective clothing
• Face Protection
8. Review and follow the Pre-Operation Checklist before using a component in the system or system itself.
9. Establish a regular maintenance and inspection program with your equipment and maintain detailed records.
10. Review safety related items and operating instructions with all personnel on a regular basis.
4.4 - Operating Safety
1.
Read, understand and follow the Product Manual as well as all printed warnings that may be located on the product itself
before using, maintaining or inspecting the equipment.
2.
Train all operators before allowing them to use the product. An untrained operator exposes themselves, bystanders
and workers to possible serious injury or death.
3.
Visually inspect the product and all auxiliary components and equipment before using. Correct any problems before
using the equipment.
4.
Securely anchor the product before using.
5.
Use only certified anchor and connector components in your system.
6.
Use only an approved full body harness for the workers.
