pellenc SELION M12, Translate Of The Original Manual

Page: 39 / 51

CHAINSAW SELION M12
51_149238-C
6.11. GREASING THE ANTI-KICKBACK CHAIN GUIDE
Lubricate the chain wheel nose sprocket (7) every day
using a grease gun (ref.: 68518) through the grease hole
(see diagram opposite).
Note
Consumables sold separately.
6.12. CLEANING THE TOOL
Keep the tool clean by cleaning it frequently using a damp
cloth and compressed air.
Pay particular attention to the parts in contact with the
wood (chain (6), chain guide (7)).
Warning
Never use solvents (trichloroethylene, white spirit, petrol, etc.) to clean the tool.
Set the battery switch to "0" and disconnect the connector.
6.13. FILLING THE CHAIN OIL RESERVOIR
• The oil reservoir must be kept clean.
• Clean the cap and the filling area before removing the cap.
• Do not allow the oil to overflow from the reservoir; wipe off any excess oil.
Warning
The oil reservoir is equipped with a strainer. If the oil does not reach the saw head, return the
tool to your authorized distributor so that he can clean the strainer.
39