pellenc AIRION 3, Operating Instructions Manual

Page: 15 / 40

BLOWER AIRION 3
57 - 147010-C
4.4. FITTING/REMOVING THE BLOWER SCRAPER (OPTIONAL)
4.4.1. MOUNTING
1. Set up the wire scraper (18) in the guide ring (19)
and the support ring (20) by pressing on the rods.
2. Align the rods on the wire scraper (18) with the
notches and fit the unit onto the outlet blowing noz-
zle (8).
3. Install the bolt (21), the washer (22) and the nut (23)
in the support ring (20).
4. Tighten the nut (23) to hold the support ring (20).
Note
The blower scraper can only be fitted on the out-
let nozzle with a diameter of 65mm, see Section 9,
“Accessories and consumables”.
4.4.2. DISASSEMBLY
1. Remove the nut (23), the washer (22) and the bolt
(21) from the support ring (20).
15