pellenc AIRION 3, Operating Instructions Manual

Page: 29 / 40

BLOWER AIRION 3
57 - 147010-C
Symptoms
State of the on/off switch of the battery
Indicator light status
Probable cause
Checks
Solutions
Repairer
On
Trigger no longer functions
At an authorised PEL-
LENC distributor
Change the trig- ger or sensor
PELLENC autho- rised distributor
The power cord is severed
Check the con- dition of the cord
Change the cord
PELLENC autho- rised distributor
The tool has reached its temperature limit
4 beeps from the battery
Let the tool cool down for roughly 5 minutes
User
The tool stops
during use
Starting the
S
w
itc
he
d
of
f
The battery is flat
When stopped, check the battery
charge level shown in the side window
Recharge the battery (if less than 10% charged)
User
Airflow duct obstructed or blocked (intake elbow, blower tube, nozzle, etc.)
Check the con- dition of the duct
Clean the duct
User
The blower makes an unusual noise or vibrates abnormally
Starting the
On
Dirty or damaged rotor
Check the condi- tion of the rotor
Clean the rotor
User
Blocked air intake grill
Check the con- dition of the grill
Clean or replace the grill
User
Clean the rotor
User
Loss of efficien- cy of the air flow
Starting the
On
Dirty or damaged rotor
Check the condi- tion of the rotor
Replace the rotor
PELLENC autho- rised distributor
The tool works, the boost is tem-
porarily unavailable
On
Switched on and con-
vergent
The tool is hot
Cooling mode in operation
Check the con- dition of the grill
Clean the grille
Allow the tool to cool down
User
29