pellenc AIRION 3, Operating Instructions Manual

Page: 8 / 40

BLOWER AIRION 3
57 - 147010-C
Note
The temperature “130°C” can be replaced by the temperature “265°F”.
7. Follow all charging instructions and do not charge the battery pack or tool outside the temperature
range specified in the instructions. Charging improperly or at temperatures outside the specified range may
damage the battery and increase the risk of fire.
2.1.6. SERVICE
1. Have your power tool serviced by a qualified repair person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
2. Never service damaged battery packs. Service of battery packs should only be performed by the manufac-
turer or authorized service providers.
2.1.7. TOOL’S END-OF-LIFE MANAGEMENT
1. When the tool reaches the end of its life, PELLENC keeps the end of life sheet of the equipment at
disposal. The end of life sheet provides instructions for safely removing components.
2.2. SAFETY INSTRUCTIONS FOR THE BLOWER AIRION 3
1. Do not misuse the power cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep the
power lead away from heat, lubricant, sharp edges or moving parts.
2. Never modify the connector in any way whatsoever.
3. Use personal safety equipment. Always wear eye protection.
4. The dust raised during operation can be harmful to health. In case of liberation of dust, wear a dust mask.
5. Comply with tool servicing instructions. Check that the moving parts are not misaligned or jammed, that there
are no broken parts or that there is no other condition which could affect the operation of the tool. In the event
of damage, have the tool repaired before using it.
6. Inspect the work area prior to starting. Remove all debris and hard object such as stones, glass, wires, etc.
which could fly and cause serious injuries or damage when the blower is in use.
7. Use the blower to blow out grass, straw or leaf waste, urban garbage.
8. Never blow towards people or animals - the blower can lift up small objects and throw them out at high speed
- risk of injury.
9. While using the blower, be careful not to endanger small animals.
10. Stop the blower, turn off the battery, disconnect the power cord and wait for the rotor to stop before opening
the air intake grille: risk of serious injuries (moving part).
11. Do not obstruct, part or all of the air intake.
12. Ensure air intake grille is properly maintained.
13. Inspect the blower before each use, check that the parts are not worn, loose, damaged or missing. Do not use
the blower if it is not in perfect condition.
14. To avoid fire spreading, do not use the blower near wood fires or barbecues, etc.
15. Do not draw up solids or liquids through the intake duct - risk of damaging rotating components and intake grille.
2.3. SAFETY MEASURES ASSOCIATED WITH BATTERY USE
1. If not using the battery unit, store it away from other metal objects such as paper clips, coins, keys, nails, screws
or other such small metal items that might form a connection between the two terminals. Creating a short-circuit
between the battery terminals can lead to burns or cause a fire.
2. Keep the battery out of the reach of children and place it on a non-combustible support.
3. Do not interfere with its cooling cycle.
4. Do not use or leave the battery near a heat source (> 60°C).
8