pellenc AIRION 3, Operating Instructions Manual

Page: 13 / 40

BLOWER AIRION 3
57 - 147010-C
4. COMMISSIONING
4.1. CONTENT OF THE KIT
Check that the box contains:
• A delivered with:
• 1 standard blower nozzle, diameter: 75mm (8)
• 1 Allen wrench (15)
• 1 user guide
• 1 warranty notice
4.2. FITTING/REMOVING THE FLAT NOZZLE (OPTIONAL)
4.2.1. MOUNTING
1. Fit the flat nozzle (16) onto the end of the outlet noz-
zle (8) up to the stud (9).
2. Make a quarter turn in the direction shown (4) to lock
the flat nozzle.
Note
The flat nozzle can only be fitted on the standard
outlet nozzle with a diameter of 75mm, see Sec-
tion 9, “Accessories and consumables”.
4.2.2. DISASSEMBLY
1. Make a quarter turn in the direction shown to unlock
the nozzle plate (16).
2. Remove the flat nozzle from the outlet blowing noz-
zle (8).
Note
There is hole on the flat nozzle so that it can be
hooked on the snap hook accessory carrier, see
Section 9, “Accessories and consumables”.
13