BLOWER AIRION 3
57 - 147010-C
4.3. ASSEMBLY / DISASSEMBLY OF THE ERGONOMIC ELBOWED NOZZLE (OPTIONAL]
4.3.1. MOUNTING
1. Choose the working position for the ergonomic el-
bowed nozzle according to the blowing work to be
performed:
• Detail A: 'COMFORT' position.
• Detail B: 'HARD WORK' position.
2. Fit the ergonomic elbowed nozzle (17) onto the end
of the outlet blowing nozzle (8) as far as the stud (9).
3. Make a quarter turn in the direction shown to lock
the ergonomic elbowed nozzle (17).
Note
The ergonomic elbowed nozzle can only be fitted
on the standard outlet nozzle with a diameter of
75mm, see Section 9, “Accessories and consum-
ables”.
4.3.2. DISASSEMBLY
1. Make a quarter turn in the direction shown to unlock
the ergonomic elbowed nozzle (17) .
2. Remove the ergonomic elbowed nozzle (17) from
the outlet blowing nozzle (8).
Note
There is hole on the ergonomic elbowed nozzle so
that it can be hooked on the snap hook accessory
carrier, see Section 9, “Accessories and consum-
ables”.
14
Summary of Contents for AIRION 3
Page 2: ......
Page 38: ......
Page 39: ......
Page 40: ...PELLENC Quartier Notre Dame 84120 Pertuis France...