BLOWER AIRION 3
57 - 147010-C
* with standard blower nozzle dia. 75mm.
** with blower nozzle dia. 65mm.
*** with a flat nozzle accessory.
**** with ergonomic elbow nozzle accessory.
5.5. “BOOSTER” MODE
The blower has a "booster" mode which gives the maxi-
mum power (940W) instantly. The speed and the airflow
rate are then at a maximum with the standard nozzle.
This mode is available for each speed.
1. Hold the selector button (1) down to switch to “boost-
er” mode. The mode is activated instantly, 4 LEDs
flash simultaneously.
2. Release the button, the tool stays in "booster" mode.
Note
A second press causes it to return to the initial
speed.
Note
Only use the “booster” mode temporarily when needed (stuck debris, etc.) in order to limit the blower power
consumption.
5.6. ‘BATTERY LIFE READING’ MODE
To know the charge level of the battery, the tool has a
‘battery life reading’ mode. To activate the ‘battery status
display’ mode:
Press the selector button for 2 seconds, the LEDs then
indicate the charge level of the battery:
• 4 LEDs: battery is 75-100% charged
• 3 LED: the battery is 50-75% charged
• 2 LED: the battery is 25-50% charged
• 1 LED: the battery is 0-25% charged
24
Summary of Contents for AIRION 3
Page 2: ......
Page 38: ......
Page 39: ......
Page 40: ...PELLENC Quartier Notre Dame 84120 Pertuis France...
