pela tools 507083, Manual

Page: 11 / 33

Contact
PELA Tools
Solängsvägen 13
SE-513 70 Borås
Phone: 033-202650
E-mail: order@pelatools.com
Environmental protection /
Scrapping
Recycle any unwanted material,
do not throw it in the household
rubbish. All machines, accessories
and packaging must be sorted and
left at a recycling center and disposed
of in an environmentally friendly
manner.
Warning
This manual is important for the machine, please
read it carefully before installation and use. It is
also important for the safe use and maintenance
of the machine. Please keep this manual in good
order for continued maintenance of the machine.
Introduction
Area of application: The automatic tyre changer is
specially designed for disassembly/assembly of
tyres from wheel rims.
Warning: Use the machine only for the purpose
for which it was designed, do not use it for other
purposes. The manufacturer is not liable for any
damage caused by non-compliance with these
regulations.
General safety instructions
The use of this machine is specially reserved for
trained and qualified professionals, those who have
already read the introductory manual carefully, or
someone who has experience with similar
machines. Any changes beyond the use of this
machine are not permitted without the permission
of the manufacturer. This can lead to malfunctions
and damage to the machine and then the
warranty no longer applies. If some parts are
damaged, please replace them according to the
spare parts list. (NOTE: The warranty is one year
after the manufacturer’s delivery date. The
warranty does not apply to the easily broken parts).
Safety instructions:
1. Do not place your hands under the mounting /
disassembly head during operation.
2. Do not place your hands between the gaps
during the operation.
3. Do not place your hands on the rim of the tyre
when removing the tire.
4. Make sure that the system is equipped with a
good earth circuit.
5. Do not place your feet between the clamping
press and the machine during operation.
6. Safety instructions, warning decals.
Warning
When the safety warning labels are worn or
missing, please restore them in time!
Do not use the machine when the safety warning
labels are missing or incomplete. Do not allow
any objects to obscure the safety warning labels.
Customers can attach the warning labels (like the
picture above) to all necessary positions.
Safety warning label
Technical data
Attachment of rim,
exterior.
300-580 mm (12~23”)
Attachment of rim,
inside.
350-660 mm (14~26”)
Max. tyre diameter 1143 mm (45”)
Max. tyre width 406 mm (16”)
Working pressure 8-10 bar
Power supply 110V (1ph)/ 220V
(1ph)/ 380V (3ph)
Optional engine power 0.37 kw
Max. torque
(mounting table)
1078 N•m
External dimensions 1130*900*1050 mm
Noise level <75dB
Note: The above-mentioned dimensions of rims
are based on sheet metal rims. Aluminium rims are
thicker than sheet metal rims, so the
above-mentioned measuring conditions are only
available to give a picture of the machine.