AIR10-1420A Operation Manual
General principles of maintenance
32
11
General principles of maintenance
This manual is about the preventive maintenance of AIR10-1420A operator. For
a complete set of industrial robot system maintenance, it shall also include:
Control cabinet maintenance - refer to "control cabinet maintenance
manual"
Warning
Before reading the "safety rules" and safety precautions, never carry out any
maintenance work, and the maintenance work can only be completed by
trained technicians.
The primary goal of preventive maintenance is to ensure maximum use of the
operating system. Every scheduled and properly implemented periodic
maintenance should help achieve this goal. If regular maintenance can not
achieve the goal of reducing the downtime of the device, it is unnecessary
maintenance and waste.
Robots are used to work in very demanding conditions and require minimal
maintenance. However, daily inspection and regular maintenance must be
carried out at given intervals.
The time interval in the maintenance table is the recommended value. The
actual time interval required for maintenance of the operator may change due
to the actual working environment of the operator and other factors.
When carrying out routine maintenance or repair, many precautions must be
kept in mind to avoid introducing additional errors or hazards into the system.
For well functioning equipment, do not perform more maintenance than is
required for regular maintenance.
All surfaces should be wiped clean before starting the maintenance procedure
In order to avoid unnecessary pollution caused by dust and other sundries, the
exterior of the control cabinet door and the outer cover of the operator shall be
cleaned before opening.
