Peco Pro 12 DFS 52621201, Operator'S Manual

Page: 5 / 32

5
Introduction
Your collection system has been designed to give you a
low maintenance, simple, and effective way to collect the
grass clippings from your mower. This manual is
provided to give you the necessary instructions to
properly mount and operate the collection system on
your mower. Please read this manual thoroughly.
Understand what each control is for and how to use it.
Observe all safety decal precautions on the machine and
noted throughout the manual.
NOTE : All references made to right, left, front, rear, top
or bottom are as viewed from the normal operator’s
position on the mower.
The grass collection system is designed for turf
maintenance where there is a need to collect the grass
clippings as the mower cuts the turf. It is also used for
picking up leaves and in pre-season and post-season
clean-up. The blower, mounted on the right side of the
unit, uses a belt and gearbox system from the engine
PTO shaft. Drive train protection comes through belt
slippage. The blower draws grass clippings from the
discharge area of the cutter deck back to the 12 cubic
foot aluminum box at the rear portion of the mower
frame. The operator can engage the blower with a push
of the over-center linkage on the right side of the unit, or
starting the external engine. Once the collection box is
full with clippings, it can be released to make for easy
dumping.
Description
Section I - INTRODUCTION AND DESCRIPTION