Peco 28131502, Operator'S Manual

Page: 9 / 46

Figure C
Rear Mount Plate Installation (Continued)
Note: It is recommended to not tighten all hardware until the Mount Arm / Top Bracket has been installed so the parts
could be easily positioned and aligned.
To install the Rear Mount Plate (Item #1), position the Rear Mount Plate to the rear of the mower’s bumper and align
the slots to the bolt holes. Refer to Figure A.
Secure the Rear Mount Plate to the mower’s bumper by using (4) M8-1.25 x 75 MM HHCS (Item #2), (5) 5/16” Flat
Washers (Item #3) , and (2) M8-1.25 Nyloc Nuts (Item #4). Refer to Figure C.
Note: Some parts and part features have been hidden from view for visual clarity
Rear Bumper