Peco 28131502, Operator'S Manual

Page: 21 / 46

Boot Kit Assembly & Installation (Continued)
To install the Boot to the mower deck, position the Boot to the deck discharge opening and rotate the Boot so that the
tabs of the Boot Plate are horizontal and parallel with the deck. Refer to Figure B.
With the discharge chute up, align and slide the tabs of the Boot Plate under the discharge chute and rotate the boot
back to its original position. The Boot Plate should sit behind the discharge chute as shown in Figure C.
Figure C
Ro
t
at
e
Figure B
Position under
Discharge Chute