Peco 28131502, Operator'S Manual

Page: 10 / 46

10
Top Bracket / Mount Arm Installation
To install the Top Bracket / Mount Arm (Item #1), position and align the Top Bracket below the Right Main Frame Leg
and under the mower’s rear frame tube. Secure the Top Bracket to the mower by loosening and replacing the
hardware used to secure the Right Main Frame Leg; (1) M8-1.25 x 75MM HHCS (Item #2), (2) 5/16” Flat Washer
(Item #3) and (1) M8-1.25 Nyloc Nut (Item #4) per slot. Refer to Figure A.
Note: Some parts and part features have been hidden from view for visual clarity
Figure A
Mount Arm / Gusset Installation
Align the Mount Arm / Gusset (Item #2) to the mount holes of the Top Bracket / Mount Arm (Item #1). Secure the
Mount Arm / Gusset relatively loose by using (3) 3/8”-16 x 1” Carriage Bolts (Item #3) and (3) 3/8”-16 Ny-Flange Lock
Nuts (Item #4).
Refer to Figure B.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure B
Rear Frame Tube