PECO II, Inc. NETMACS II Manual
Foreword
This manual is intended to help the user of the NETMACS II to install, test, troubleshoot, and understand
the system. If you should have any questions or problems, please contact one of the following sources:
SERVICE
- If for any reason further assistance is needed on any power equipment, complete
engineering and field service groups are available in Galion, Ohio, to assist you in any way possible.
CALL: 419.468.7700 Field Service
OR
419.468.7600 and ask for Field Service
PARTS ORDERING -
Replacement parts for power equipment may be obtained by forwarding a
Purchase Order to:
PECO II, Inc
OR
Fax to: 419.462.8180
P. O. Box 910
Galion, Ohio 44833
Include the following information:
A. PECO II part number and engineering level of equipment
B. If part is electrical, give circuit reference numbers and PECO II part numbers.
C. If part is mechanical in nature, give description as to where it is used.
RETURN & REPAIR
- Equipment may be returned to the Factory for repair. In order to do this, the
procedure must be as follows:
A. Call: 419.468.7700 Field Service
OR
419.468.7600 and ask for Field Service
B. Request a Returned Material Authorization (RMA) number for the defective equipment.
C. Return material prepaid to:
PECO II, Inc
1376 State Route 598
Galion, Ohio 44833
Attn: Field Service Dept
Product Information
Please take a moment when the product is new to fill in this information. This data will allow faster service
when calling PECO II to order accessories, spare parts, or request field service.
First, locate the product information label. This is typically located on the upper front of the equipment
frame, or on the rear of the frame. Fill in the part number, as it appears on the label, in the space below.
PART NUMBER
DATE CODE:
SERIAL NUMBER
ECN Level: 860 _ _ _ _ P
Issue 16, February 2007 Page 5
StockCheck.com
