PECO II, Inc. NETMACS II Manual
SECTION 4: SYSTEM CONFIGURATIONS /
PARTS LIST
4.1 GENERAL
This section gives the complete parts listing of the system for the components that are repairable at the
field level.
Available systems are identified by a configuration model code (CC) alpha assignment. Each component
as identified on the parts list has the configuration model code character assigned. In many cases the
parts are used on all systems produced by PECO II. If the component is used on all systems, the
configuration model code will have a dash.
Indenture Code (IC) on the parts list refers to the level of indenture of a part as compared to the
assembly. For example, an assembly may have several subassemblies. Under the subassemblies there
may be parts associated with that subassembly. In this example the assembly would not have an
indenture level since that is the main component. The subassembly would be indenture level 1. The
parts that make that subassembly would be indenture level 2.
As Required (A/R) in the Quantity (QTY) column implies that the part may be used more than once and is
dependant on the operator. In addition, if a dash precedes an Item Number (i.e., -10) that item is used by
the assembly but is not referenced in the illustration.
4.2 CONFIGURATIONS
TABLE 4-1
. System Parts Listing
Item No. PECO Part No. Nomenclature IL CC QTY
-1
6200442P1-1
PicoMACS II PWB
-
-
-
-2
6200608P1-3
Gateway PWB Assembly
-
-
-
-3 6200467P
Relay
PWB
-
-
-
-4
3750020P
3.6V Lithium Battery
-
-
-
-5
6420570P
NetMACS Wall Mount Kit
-
-
-
Issue 16, February 2007 Page 29
StockCheck.com
