26
VI. OPERATION INSTRUCTIONS
To lift vehicle
1.
Keep clean of site near the lift, and down the lift to the lowest position.
2.
Drive vehicle to the platform and put on the brake.
3.
Turn on the power and press the button
Up
, raise the lift to the working position.
Note:
make sure the vehicle is steady when the lift is rising
4.
Press the button
Lock
, lock the lift in the safe position. Make sure the safety is
locked in the same height.
To lower vehicle
1. Be sure clear of around and under the lift, only leaving operator in lift area.
2. Press the button Down1, until the lift low down to 600mm from ground, the lift
stop by the low limit switch, then press button
Down1
and
Down2
in the same time,
lift go on running down with warning alarm.
3. Drive away the vehicle when the lift is lowered to the lowest position.
4. Turn off the power.
VII. MAINTENANCE SCHEDULE
Monthly:
1.
Re-torque the anchor bolts to 80-117 Nm.
2.
Lubricate all moving parts with lubricant
(See Fig.49-52)
.
Fig. 48
For
main cylinder connecting pin
Fig.49
For
pin
of piston rod
Fig.50
Power Switch
UP
LOCK
DOWN2
DOWN1
Summary of Contents for PX09
