Peak PX09, Installation And Service Manual

Page: 18 / 37

16
3.2 Circuit Diagram
(See Fig. 30) .
Electric Component
E. Level two platforms and install anchor bolts.
1. Check by level bar and use the shims to adjust the platforms until two platforms are
in the same level
( See Fig.31 ).
Item Name Code Specification Item Name Code Specification
1 Power switch QS 380V AC 10 Push button UP Duplex
2 Fuse FU1 25A 11 Push button LOCK Duplex
3 Fuse FU2 3A 12 Push button Down1 Triple
4 AC contactor KM 24V AC 13 Push button Down2 Duplex
5 Thermal relay FR 12A-18A 14 Motor M Single Phase
6 Time relay KT 24V AC 15 Buzzer H 24VAC
7 Limit Switch
SQ
（
1~2
）
10A
16 Transformer TC 24V AC
8 Hydraulic
solenoid valve Y1 24V AC 17 Intermediate
relay KA 24VAC
9 Air solenoid
valve
Y2 AC 24V
Fig. 30
PII
PI
Using the Level Bar for
the measurement
Fig. 31
Single phase