Peak Scientific Genius XE 70, User Manual

Page: 12 / 36

Page 12
Fittings Kit Contents
Supplied in the Fittings Kit are all the fittings required to connect the generator to the
application. The contents of the Fittings Kit are as follows:
Genius XE 35 (120V)
1. 1/4" x 1/4" Compression Fitting x 1
2. 1/4” x 6mm Push-Fit Fitting x 2
3. Flow Control Silencer x 1
4. 1/4” PTFE Tubing x 3m
5. 6mm PTFE Tubing x 3m
6. 6mm Polyethylene Tubing x 3m
7. 4mm Hex Key x 1
8. US 120V Mains Power Cable x 1
9. Genius XE Installation Guide x 1
Genius XE 35 & XE 70 (230V)
1. 1/4" x 1/4" Compression Fitting* x 1
2. 1/4” x 6mm Push-Fit Fitting** x 2
3. Flow Control Silencer x 1
4. 1/4” PTFE Tubing* x 3m
5. 6mm PTFE Tubing* x 3m
6. 6mm Polyethylene Tubing x 3m
7. 4mm Hex Key x 1
8. UK Mains Power Cable x 1
9. EU Mains Power Cable x 1
10. US 230V Mains Power Cable x 1
11. Genius XE Installation Guide x 1
12. 1/4" Tee Fitting*** x 1
* x2 in XE 70 Fittings Kit
** x3 in XE 70 Fittings Kit
*** XE 70 Fittings Kit Only
All generator output ports are located on the output panel at the rear of the unit.