Page 29
Service Indication
The generator will notify the user of the service interval for the internal compressors.
The generator has the following Service Indication Stages:-
Stage 1
12 months after installation, the service indicator will show on the display along with a
warning message.
This is to make the user aware that a service of the generator is due and should be
planned at the earliest convenience. The generator will continue to operate as normal
with the service indicator on. If the warning message has been acknowledged, the icon
will still be displayed in the corner of the HMI; pressing the icon will show the message
again.
Stage 2
If the service is not completed the generator will continue to run. After 2 weeks, the
service overdue indicator will show on the HMI along with a warning message.
This is to make the user aware that the service of the generator is now overdue and
must be completed immediately to ensure the continuous trouble free operation of
the generator. If the warning message has been acknowledged, the icon will still be
displayed in the corner of the HMI; pressing the icon will show the message again.
Service Indication Reset
Once the service has been completed the Service Indication can be reset through the
service interface. This will be performed by the Peak Service Engineer or trained service
representative that completes the service operation.
Summary of Contents for Genius XE 70
Page 34: ...Page 34 Notes...
Page 35: ...Page 35 Notes...
