PE micro Cyclone MAX User Manual Download Page 9

Page: 9 / 88

Cyclone for ARM devices User Manual

Cyclone for ARM

devices

– 20-Pin Mini Debug Connector SWD Mode

– 10-Pin Mini Debug Connector JTAG Mode

– 10-Pin Mini Debug Connector SWD Mode

• User selectable target communication speed.

•

Multiple SAP Images

• Onboard Flash stores up to 8 images.

• CompactFlash (if activated) stores more than 200 images.

• Images for different architectures can co-exist.

•

Multiple Memory Modules In One SAP Image

• Supports multiple programming algorithms for internal or external

memory modules such as EEPROM and Flash.

•

Automatic Serial Number Mechanism

• Supports serial number programming and automatic incrementing

• Supports multiple serial number structures within each SAP Image.

•

Powerful Automated Control Package For Production Control

• Basic Automated Control Package (included) supports host-

controlled SAP operations for one Cyclone for ARM devices.
Professional and Enterprise Automated Control Packages available
for purchase.

• Multiple Cyclones for ARM devices can create a Gang Programmer

using a variety of different communication interfaces.

• Different SAP Images on different Cyclones for ARM devices can

execute simultaneously.

•

Versatile Programming Software

• Free image creation utility, image management utility, and IP

configuration utility

• Activation license for CompactFlash support available for purchase

Summary of Contents for Cyclone MAX

























































































Search results

Summary of Contents for Cyclone MAX

Reviews:

Related manuals for Cyclone MAX

Brands by name

Popular brands

PE micro Cyclone MAX, User Manual

Search results

Summary of Contents for Cyclone MAX

Reviews:

Related manuals for Cyclone MAX

Brands by name

Popular brands