8
Cyclone for ARM devices User Manual
Cyclone for ARM
®
devices
e. Type an Image Description for your SAP image. The default
description is a time stamp.
f.
Click the “Store Image to Cyclone” button.
g. Choose the communication interface, select the Cyclone for ARM
devices to which the image will be saved, and then click the
“Store Image to Cyclone” button. A backend image configuration
utility will pop up and store the image information on the Cyclone
for ARM devices. Your SAP image has now been created.
Step 4.
Execute SAP Image
The SAP image stored on your Cyclone for ARM devices can now be
executed with one button press. Once your target is connected to the Cyclone
for ARM devices, press the “START” button of the Cyclone for ARM devices
unit and wait for programming operations to finish. During this process, the
LCD screen and LEDs will show the status of operations. Eventually the
“Success” or “Error” LED will illuminate, and the LCD will display the results.
