PDI-P15LCDB User Manual
Document Number: PD196-096 Rev 2
- 3 -
PRODUCT MODIFICATION
Do not attempt to modify this product in any way without written
authorization. Unauthorized modification could void the user’s authority
to operate this product.
POWER
Arm Mounted
This set operates from a PDI-771-LCD power supply when arm
mounted. The supply is housed in the support arm wall bracket.
a. Connect the arm power cord that exits the base of the support
arm.
b. Connect the power cord to an AC outlet.
c. Connect the hospital CATV coax. NOTE: Do not connect to a
powered coax! Damage will result to the TV.
Wall Mounted
The wall mount version is powered using an external brick style power
supply mounted to the wall bracket.
In the event of thunderstorms or power outages, please unplug the AC
plug from the wall outlet and unplug the cable TV coax. Do not allow
anything to rest upon or roll over the power cord, and do not place the
set where the power cord is subject to damage.
REGULATORY INFORMATION
FCC
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a residential or
commercial installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for
help.
UNDERWRITERS LABORATORIES
This device is safety tested and listed by the Underwriters Laboratories
as a product for use in both the United States and Canada.
CATV CO
AX