PDI-P15LCDB User Manual
Document Number: PD196-096 Rev 2
- 19 -
Programming Channels
Three different Service Levels (banks) are available to hold channels: Free, Basic, and Premium.
A Disable Service level is provided to remove the TV from service. Channels can be
programmed using either an Automatic or Manual method.
AUTO PROGRAM
Automatically memorizes all the receivable channels on a hospital’s cable TV system.
Press the
MENU
button on the remote.
1. Select
the
Setup
menu.
2. Select
Auto Program
.
3. Press
the
CH
▲▼
button and select
Table
.
4. Select the TV cable system in your hospital with the
VOL
◄►
button.
NOTE: Table = V/UHF is used for a cable system that
has a master antenna and usually can only receive
local TV Stations.
Table = Cable is used when a hospital cable system
has both local and satellite TV channels available.
Table mode = Cable is most common in hospital TV
systems.
5. Select the desired
Service Level
to be programmed.
6. Select
the
Start
menu item with the
CH
▲▼
button.
7. Press
the
VOL
◄►
button to start Auto Programming. The TV will now search all
available channels looking for signals and memorizing those channels that are active.
Occasionally, strong over-the-air stations sneak onto the cable system. To remove
unwanted channels see Manual
Program
.
8. Press
the
MENU
button to finish auto programming.
9. Press
the
TV/AV
button to return to normal TV viewing.
HINTS
•
Press the
CH
▲▼
buttons to check the memorized channels after auto programming is
finished.
•
If you press the MENU button during auto programming, the function will stop and only
channels programmed up to that point in time will remain.
•
The auto programming function can memorize only those channels which are active at the
time of programming. For example, a hospital educational channel may not be actively
playing a tape and would not be memorized using auto program. See the Manual Program
section for adding and deleting channels.
•
Each service level is listed showing their current condition as either Programmed or Blank.
MANUAL PROGRAM
Manual Program allows you to manually add or delete channels
within a particular Service Level and also add or edit channel
name labels.
1. Tune to the channel you wish to add or delete. Press
the
MENU
button.
2. Select
the
Setup
menu.
3. Select
the
Manual
Program
menu.
4. Press
the
VOL
◄►
buttons or directly enter the
channel numbers using the remote control.
5. Press
the
CH
▲▼
buttons to select
Table
if necessary.
Usually Table does not require adjustment.
Position:
▲▼
Next:
◄►
Back : MENU Exit : TV/AV
Channel 2
Table Cable
Edit Name
►
Service Level Free
Storage On
Manual Program
Position:
▲▼
Adjust :
◄►
Back : MENU Exit : TV/AV
Table Cable
Start
Service Level Free
Free Programmed
Basic Blank
Premium Blank
Auto Program
