OPERATING INSTRUCTIONS
9
5
Operating Instructions
5.1 Switching on / off
Press the on / off button until an acoustic signal is emitted
. Then “8.8.8.8.8” appears on the
display. The maximum weight is shown “1000.0”. (= 1000 kilograms or 1 ton). The next
information shown on the display is the battery value
“Bat (Percentage value)”.
Keep the
“On / Off” button pressed now, until the equipment makes an acoustic signal sound.
Now let go of the button. The equipment turns itself on. Then the battery value appears on the
display. “Bat(percentage value)”. “Off” is then displayed. The equipment switches off.
The remote control can also be used to
switch the equipment off. Press the “Power” button on the
remote control.
The equipment cannot be switched on with the remote control.
5.2 Zero
Press the
button until an acoustic signal sounds.
”Z” appears on the display.
The remote control can also be used
to do this. Press “→0←”
Make sure the
value is stable. Otherwise “Err” appears on the display, which means the scale
hasn’t been succesfully set to zero.
5.3 Tare
Quickly press the
button.
”T” appears on the display.
The remote control can also be used to do
this. Press “→T←”
Make sure the value is stable. Otherwise “Err” appears on the display, which means the scale
hasn’t been succesfully set to zero.
5.4
Save value
To “freeze” the value on the display, press
on the remote control. The value will then be
“frozen”. “H” for HOLD appears on the display.
To carry on with the measurements, press
again.
5.5
Change measuring unit
Use the remote control to change the measuring unit. Press the “F2” button to choose between
the measuring units
: “KG” (kilogram”, “LB” (Pound) and “UN” (User unit). (UN is explained in point
8.1.10)
