OPERATING INSTRUCTIONS
12
8.1.7 Setting measuring interval
To set the stability strength, press
seven times.
“Stb (strength)“ is displayed.
The strength can be changed with the remote control. Choose between 0 (switched off), 1
(weakest), 2 (weak), 3 (normal), 4 (strong), 5 (strongest).
To save the settings, press
until “End” appears on the display.
8.1.8 Setting dynamic weighing
If you
need a quick indication of weight, but accuracy isn’t necessarily important, then this is the
function that could be advantageous for you.
To turn the
“dynamic weighing” function on and off, press
eight times. “dy(on/off)” is
displayed.
This function can be activated (on) or deactivated (off)
with the arrow buttons “up” and “down”.
To save the settings, press
until “End” appears on the display.
8.1.9 Setting gravity
To set the gravity, press
nine times.(value) is displayed.
The value can be changed
with the “up” and “down” buttons. The lowest value is 0.000 and the
highest is 9.999. 9.794 is the average value.
To save the settings, press
until “End” appears on the display.
8.1.10 Setting user unit
The weight can be converted into a different information. Example: A cable reel weighs 785,5 kg, how
many metres of cable are on the reel? You can provide the scale with a conversion factor that converts
the weight
. You can switch between the weight reading and the user unit “U”.
To change the user unit, press
10 times. U (value) is displayed.
With the arrow buttons on the remote control, values can be chosen between 0.000 and 9999. To
be able to use this function, t
he measuring unit has to be changed to “UN” whilst the weight
measurement. The user unit is dependent on kilogram.
