PCE Instruments PCE-CS 1000 N, Manual

Page: 10 / 15

OPERATING INSTRUCTIONS
10
6 Equipments settings
The remote control is required to get
to the equipments setup. Press the “ “and then press
straight
after. “Setup” then appears on the display. You are now in the equipments setup. To access the following
functions, you must press .-
6.1
“oFF” Set automatic switch-off

Press .
“Off (time)“ appears on the display.

Press “→0←” to set the automatic switch-off time (in minutes). Choose between 0 / 5 / 10 / 15 /
30 / 60 minutes.

To save the settings, press
until “End” appears on the display.
6.2
“br 3” Set background lighting

To set the background lighting, press twice.
“br (Illuminance)” appears on the display.

Now press
→0← to set the lighting. Choose between OFF / 1 / 2 and 3. The higher the number
is, the stronger the lighting becomes

To save the settings, press
until “End” appears on the display.
6.3
“IdL” Lighting duration”

To set the lighting duration, press three times.
“ldl (lighting duration)” appears on the display.

Press the
→T← to set the lighting. You can set it on to 0, 5, 10, 15, 30 and 60. These values are
seconds. Press
until “End” appears on the display to save the settings.
7 Troubleshooting
Symptom Cause Solution
Equipment won’t switch on.
The battery is empty or is
damaged.
Change the batteries. The scale
won’t go on, if the voltage is
under 3,2 V.
Background lighting is flashing. The battery is nearly empty. Change the batteries.
The buttons do not function. The buttons are faulty. Return the equipment for repair.
Readout does not remain stable The equipment is faulty. Return the equipment for repair.
The item being weighed is
moving or not steady.
Stabilize the item.
“Err” appears on display whilst
taring and zero setting
The item being weighed is
moving or not steady. The value
is not stable.
Stabilize the item being weighed.