28
Motherboard User’s Guide
Init Dispaly First
This item allows you to choose the primary display card.
Allocate IRQ to PCI VGA
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics system.
You set this value to No to free up an IRQ.
This page sets up some parameters for devices installed on the PCI bus and
those utilizing the system plug and play capability.
PCI Health Status Page
This page helps you monitor the parameters for critical voltages, temperatures
and fan speeds.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
PC Health Status
Vcore : 1.296V
Vdimm : 1.592V
Vcc5V : 1.296V
CPU FAN Speed : 1962RPM
CPU Temperature : 162°C/143°F
CPU SMART Fan Control
Help Item
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
PCI / PnP Setup Page
Hardware Health Event Monitoring
Disabled
Disabled
Enabled
Options
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
PCI / PnP Setup
Init Display First
PCI
Allocate IRQ to PCI VGA
Yes
Help Item
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
PCI
PCI Express Card
Options
