26
Motherboard User’s Guide
Power Management Setup Page
This page sets some parameters for system power management operation.
ACPI Suspend Type
Use this item to define how your system suspends. In the default, S3 (STR), the
suspend mode is a suspend to RAM, i.e., the system shuts down with the
exception of a refresh current to the system memory.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Power Management Setup
Help Item
Select the ACPI
state used for
System Suspend.
HDAC Audio Controller
LAN Controller
This option allows you to enable or disable the onboard LAN controller.
LAN Option ROM
Onboard USB Function
Enable this item if you plan to use the USB ports on this motherboard.
USB Function For DOS
Enable this item if you plan to use the USB ports on this motherboard in a DOS
environment.
Use this item to enable or disable the onboard Audio controller.
Use this item to enable or disable the booting from the onboard LAN with a
remote boot ROM installed.
Press <Esc> to return to the main menu setting page.
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
ACPI Suspend Type S1
Suspend Time Out
Disabled
Resume on RTC Alarm
Disabled
Resume On Ring
Disabled
Resume On PME#
Enabled
Resume by WOL Disabled
Resume On PS/2 Mouse
Disabled
Resume by PCI-E PME Disabled
PWRON After PWR-Fail Power Off
Soft-Off by PWR-BTTN Instant Off
USB Device Wakeup Function Enabled
Resume On KBC
Disabled
Wake-Up Key
Any Key
Suspend Time Out
This item sets up the timeout for Suspend mode in minutes. If the time selected
passes without any system activity, the computer will enter power-saving Sus-
pend mode.
