25
Chapter 3: BIOS Setup Utility
This page sets up some parameters for peripheral devices connected to the
system.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Integrated Peripherals
Help Item
Allow BIOS to Enable
or Disable Floppy
Controller.
Integrated Peripherals Page
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
OnBoard Floppy Controller
Enabled
Serial Port1 Address
3F8/IRQ4
Serial Port2 Adress 2F8/IRQ3
Serial Port2 Mode Normal
Parallel Port Address
378
Parallel Port Mode
ECP
ECP Mode DMA Channel DMA3
Parallel Port IRQ IRQ7
SATA Controller IDE
HDAC Audio Controller Auto
LAN Controller Enabled
LAN Option ROM Disabled
OnBoard USB Function
Enabled
USB Function For DOS Enabled
OnBoard Floppy Controller
Use this item to enable or disable the onboard floppy disk drive interface.
Serial Port1/2 Address
Use this item to enable or disable the onboard COM1 serial port, and to assign a
port address.
Parallel Port Address
Use this item to enable or disable the onboard Parallel port, and to assign a port
address.
Parallel Port Mode
Use this item to select the parallel port mode. You can select Normal (Standard
Parallel Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port),
or BPP (Bi-Directional Parallel Port).
Serial Port2 Mode
If Serial Port 2 Address is not disabled, it allows you to set the Serial Port 2 Mode.
ECP Mode DMA Channel
Use this item to assign the DMA Channel under ECP Mode function.
Parallel Port IRQ
Use this item to assign IRQ to the parallel port.
SATA Controller
Use this item to enable or disable the onboard SATA controller.
