22
Motherboard User’s Guide
Advanced Setup Page
This page sets up more advanced information about your system. Handle this
page with caution. Any changes can affect the operation of your computer.
TM Status
This item display CPU Thermal Monitor status.
Limit CPUID MaxVal
This item can support Prescott CPUs for old OS. Users please note that under
NT 4.0, it must be set “Enabled”, while under WinXP, it must be set “Disabled”
Hyper-Threading Technology
This item is only available when the chipset supports Hyper-Threading and you
areusing a Hyper-Threading CPU.
Quick Power On Self Test
Enable this item to shorten the power on self testing (POST) and have your
system start up faster. You might like to enable this item after you confident that
your system hardware is operating smoothly.
Boot Up NumLock Status
This item determines if the NumLock key is active or inactive at system start-up
time.
APIC Mode
This item allows you to enable or disable the APIC (Advanced Programmable
Interrupt Controller) mode. APIC provides symmetric multi-processing (SMP)
for systems, allowing support for up to 60 processors.
1st/2nd/3rd Boot Device
Use these items to determine the device order the computer uses to look for an
operating system to load at start-up time.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Setup
Help Item
Disabled for WindowsXP
TM Status
Limit CPUID MaxVal
Hyper-Threading Technology
Quick Power on Self Test
Bootup NumLock Status
APIC Mode
1st Boot Device
2nd Boot Device
3rd Boot Device
Hard Disk Drives
Removable Drives
CD/DVD Drives
Boot Other Device
BIOS Protect
TM1
Enabled
Enabled
On
Enabled
1st FLOPPY DRIVE
ST3120023AS
DVD-ROM DDU1632
Press Enter
Press Enter
Press Enter
Yes
Disabled
Disabled
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
