background image

23

Chapter 3: BIOS Setup Utility

    CD/DVD Drives (Press Enter)

Scroll to this item and press <Enter> to view the following screen:

f

Specifies the boot
sequence from the
available devices.

CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.

CD/DVD Drives

                         : Move   Enter: Select   +/-/: Value       F10: Save  Esc: Exit
           F1: General Help                       F9: Optimized Defaults

CD-DVD Drives

1st Drive

Help Item

DVD-ROM DDU1632

Press <Esc> to return to Advanced Setup screen.

    Removable Drives (Press Enter)

Scroll to this item and press <Enter> to view the following screen:

f

Specifies the boot
sequence from the
available devices.

CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.

Removable Drives

                         : Move   Enter: Select   +/-/: Value       F10: Save  Esc: Exit
           F1: General Help                       F9: Optimized Defaults

Removable Drives

1st Drive

Help Item

1st FLOPPY DRIVE

Press <Esc> to return to Advanced Setup screen.

    Hard Disk Drives (Press Enter)

Scroll to this item and press <Enter> to view the following screen:

f

Specifies the boot
sequence from the
available devices.

CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.

Hard Disk Drives

                         : Move   Enter: Select   +/-/: Value       F10: Save  Esc: Exit
           F1: General Help                       F9: Optimized Defaults

Hard Disk Drives

1st Drive
2nd Drive

Help Item

1st FLOPPY DRIVE
WDC WD2500JS-08NCB1

Press <Esc> to return to Advanced Setup screen.

Summary of Contents for P53G Series






















































Reviews: