Paxar Monarch 9825, Reference Manual

Page: 161 / 294

Status2
B- Field Type represents the MPCLII field that the error
occurred on. If the packet has no fields,
Status2 A will be replicated. If the error
occurs before the field is identified a question
mark is sent. Since the batch data is
variable, a
D is sent to indicate data.
Status2
C- Field Number represents the field number within each
packet. The packet header is the first field
and each subsequent field is indicated by the
field separator.
Status2
D- Parameter represents the parameter within the field that
the error occurred. The numbering begins
after the field identifier.
Status2
E- Error Number is the error that coincides with the error
numbers presented in Chapter 8, "Diagnostics
and Errors."
"FMT-1/BCH-2" The format or batch number is returned.
If more than one error occurred then only the
most serious error will be acknowledged.
{J,"","F,B,4,6,33","FMT-1","BCH-2"}
Indicates that an error occurred on a bar code ( B ) field within a
format ( F ) packet. The bar code field is the fourth ( 4 ) field in the
packet. The error occurred in the sixth ( 6 ) parameter of the field.
Error number 33 means the bar code density is invalid.
To clear an error, press ENTER or ESCAPE/CLEAR , depending
on your printer. An ENQ can also clear errors numbered less than
500. Once the error is corrected, a job request can be sent. The
printer cannot accept another job request until the error is
resolved.
Status Polling
7-11