Paxar Monarch 9825, Reference Manual

Page: 60 / 294

C r e a t i n g a V e r i f i e r C o n f i g u r a t i o n P a c k e t
With the verifier configuration packet you can customize the
verifier for each format you print. You can select which bar codes
to scan, the acceptable ANSI grade levels, quiet zone,
X-dimension range, and more. You can download the PAXAR

Verifier Configuration Tool (from our Web site) to create this
packet or follow the syntax below.
Syntax
{V,format#,action,device,"name"
p
D,"vfr_comds"
p
}
V1. V Verifier Configuration
V2. format# Format number from 0-999 to identify the format number that
corresponds to this particular verifier configuration. (Use
format number 1 with care, because many sites have multiple
formats using one as the format number.)
NOTE: You can specify up to 50 different verifier
configurations for your formats.
V3. action Enter A to add a verifier configuration.
V4. device Storage device. Options:
F Flash. Stores the verifier configuration in the printer.
Packets stored in flash memory are saved when the
power is turned off.
T Temporary. Passes the packet through the printer
and stores the packet in the verifier. Packets stored
in temporary memory are lost when the power is
turned off.
V5. "name" Packet name, 0-8 characters, enclose within quotation marks.
The name you enter here is shown as a custom configuration
on the menu for MODE. Refer to your
Operating Instructions
for more information.
D1. D Non-Printable Text/Data Field.
D2. "vfr_comds" Verifier commands. Must be enclosed within quotation marks.
Refer to the
SV Series Operator’s Guide for the complete list
of verifier commands.
2-40
Configuring the Printer