manualshive.com logo in svg

Paxar Monarch 9825, Reference Manual

Share
Download
Paxar Monarch 9825 Reference Manual Download Page 140

Turn on the printer and make sure it is ready to receive data
before you download.  See your host’s documentation, system
administrator, or "Downloading Methods" for information on ways
to download. 

When downloading, send your packets in this order:

1.

Memory configuration packet (M)

2.

Configuration packets (A-G)

3.

Any of the following:

✦

Check digit packets (see Chapter 4)

✦

Format packets (see Chapter 3)

✦

Graphic packets (see Chapter 5)

4.

Batch data (see "Defining the Batch Header")

F o r m a t t i n g   F l a s h

Before you send packets to flash memory, it must be formatted
first.  

This is required once during initial printer setup.

  On the

9800 series printers, from the Main Menu, select Setup, Flash
Memory, then Format Flash.  The process takes a few minutes.

When you format flash memory, the script and
any downloaded TrueType® fonts saved in the

printer’s flash memory are deleted and must

be resent to the printer.  Refer to your

printer’s 

Operator’s Handbook

 for more

information.

6-2    

Printing

Summary of Contents for Monarch 9825







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands