Care and Maintenance
5-1
C A R E A N D
M A I N T E N A N C E
This chapter tells you how to
♦
clear supply jams
♦
clean the printhead
♦
clean the platen roller and printer.
C l e a r i n g S u p p l y J a m s
When you are printing and a jam occurs, the indicator
light turns RED. To clear the jam:
1.
Turn off the printer. Press the switch on the back
of the printer to the OFF position (O).
You should turn off the printer’s power
before you clear a supply jam. If you
need to clear a supply jam during a
print job, you may lose your data
when you turn off the printer.
2.
Press the release levers towards the front of the
printer to release the supply door.
3.
Lift open the supply door. The supply door
support
at the right-hand rear of the printer holds
the supply door open.
4.
If necessary, remove any previously loaded
supply. Lift up the supply holder and remove one
of the supply holder guides.
5.
Slide the supply off the holder.
5
