Loading Supplies
3-7
L o a d i n g L a b e l s f o r P e e l M o d e
Peel mode separates the label from the backing paper
while printing.
NOTE
The minimum label length for peeling is
0.75 inches (19 mm). Hold the leading
edge of peeled labels when printing on
supply longer than six inches.
1.
Remove and discard the tape from a new roll of
supply. Unwrap and discard supply with any glue
residue.
2.
Press the release levers (located on both sides of
the printer) towards the front of the printer to
release the supply door.
3.
Lift open the supply door. The supply door
support at the right-hand rear of the printer holds
the supply door open.
Supply Door
Support
