2-4
Loading A Ribbon
5.
Attach the ribbon reel to the back hub.
6.
Peel and carefully unwind a few inches of ribbon
from the bottom of the roll.
7.
Press the release levers towards the front of the
printer to release the supply door.
8.
Lift open the supply door. The supply door
support
at the right-hand rear of the printer holds
the supply door open.
9.
Feed the end of the ribbon under the printhead
and around the take-up core.
10.
Stick the leading edge of the ribbon onto the take-
up core.
11.
Rotate the take-up core until the ribbon leader is
firmly wrapped around the take-up core and the
black portion of the ribbon is exposed.
