Loading Supplies
3-3
4.
Remove the supply holder guide from one end of
the supply holder. (The supply holder is normally
attached with a line to the inside of the printer, not
free-standing as shown below. Do not cut the
line.)
5.
Slide a roll of supply onto the supply holder.
If the core diameter on your roll of
supply is 1 inch in diameter, remove
the 1.5-inch supply core adapters
from the supply guide holders.
6.
Slide the supply holder guide back onto the end of
the supply holder. If you are using the supply
core adapters for 1.5-inch core supply, make sure
to push the supply core adapters into the ends of
the supply.
Supply Holder Guides
Supply Holder
1.5-inch Supply
Core Adapter
