Pavailler Rubis 2, User Manual

Page: 13 / 52

RUBIS 2/4 OVENS
26800 Portes-Lès-Valence – France
7
Connection table:
Oven type RUBIS
Connection (mm) Water inlet Copper 10 x 12
Water outlet Copper 10 x 12
Steam outlet Diameter 116
Water inlet with a maximum pressure between 1 and 5 bars with a shutoff
valve.
A water overflow outlet is to be provided in the ground using a pipe of 40
mm to the sewer with a minimum slope of 1 cm/m.
The steam flue must be equipped with a bleeder for condensate
evacuation.
Provide a lower and upper ventilation of the site.
Clearance between the oven and the wall and ceiling according to valid
regulations.
Electrical connections on terminal block:
The sections are given for U1000R02V or H07RNF cables.
For sizing your disconnector, refer to the table of current flows on page 6.
A water overflow outlet is to be installed by the customer (pipe of min. 33 x
42) with a minimum slope of 1 cm/m.
● Steam generator: The water inlet must be provided with
a shutoff valve.
●
Hood: A terminal block behind the oven is provided for
the power supply of the hood (max. 1A). The controls
(breaker) of the hood are placed on the oven front panel.