Pavailler Rubis 2, User Manual

Page: 27 / 52

RUBIS 2/4 OVENS
26800 Portes-Lès-Valence – France
21
8 +(1.% *
IMPORTANT: The fuses used were calculated for normal oven operation. If a
fuse or any other part of the oven is defective it has to be replaced with its
Pavailler equivalent.
(see section "8. Spare parts")
FAULTS CAUSES REMEDIAL ACTION
1. The oven does not heat up.
- a/ The power indicator is
red (1).
- The power button is not activated. - Press the power button (1).
- b/ The control module is
energized, the temperature
displays -A- and the LED
bars -B- and -C- light up.
- Temperature control is not in demand.
The selected temperature is too low.
- The fuses are defective.
- Make sure the setpoint temperature is
higher than the baking temperature.
- Cut out the circuit breaker and replace the
fuses.
- c/ The control module is
energized, the temperature
display A shows E0 or E2 -
EC.
- The temperature sensors are
defective.
- Call a Pavailler technician.
- d/ The control module is
completely turned off.
- The control fuses are defective.
-
- The safety thermostat is cut off. - Cut out the circuit breaker and replace the
fuses.
-
- Wait until the oven has cooled off and
reset the safety thermostat. To do so,
open the switch box and press the red
button at the bottom.
- The control module is
completely turned off, you
have a programming timer
which lights up.
- The device is in automatic start-up
mode.
- Change the mode on your timer, changing
to baking.
2. The lighting or the hood do not work.
- The lighting does not work. - The lamp is defective. - Replace the lamp.
- The lighting and the hood
do not work.
- The fuses are defective. - Cut out the circuit breaker and replace the
fuses.
3. The steam injection does not work.
- The control module is
energized, there is no
steam.
- No water arrives at the inlet. - Check the water of your system.