Pavailler Rubis 2, User Manual

Page: 15 / 52

RUBIS 2/4 OVENS
26800 Portes-Lès-Valence – France
9
3.1 Connection procedure
If the installation site of the oven complies with the above recommendations
you can start making the necessary connections.
To do so proceed as follows:
Have the disconnector and a suitable cable at hand.
Install the disconnector and connect the cable.
For safety reasons the disconnector must be cut out.
Fix the cable up to the back of the oven.
Unscrew the back panel at the back of the oven.
Thread the cable through the gland box.
Leave the cable slack.
Neatly strip the wires.
Wire according to the diagram opposite.
Securely retighten the terminal screws, the wires should not move in their
housing.
Retighten the gland box. Leave some slack on the wires inside the oven
above the terminal block.
Screw the back panel of the oven back on.
In the event of any problem during installation you should contact our
technicians or dealers.