Paul thermos 300 DC, Operating Instructions Manual

Page: 17 / 72

Status 14.07.09
We reserve the right to make
changes favouring technical
progress.
User Guidance
Automatic Control Unit
thermos 200 / 300 DC
®
WÄRMERÜCKGEWINNUNG
© Paul Wärmerückgewinnung GmbH • August-Horch-Straße 7 • 08141 Reinsdorf • Deutschland
Tel: +49(0)375-303505-0 • Fax: +49(0)375-303505-55 • E-Mail: info@paul-lueftung.de • Internet: www.paul-lueftung.de
5
1.2.3 Menu Settings – Filter change 2.0
Menu for customising the filter change interval.
The filter change interval can be varied between 30 … 250 days. Press TA3 and TA4 (+,-) to increase or
reduce the number of days for the interval.
After reset, the day counter starts a countdown for the remaining service time.
After the interval has lapsed, the basic menu shows the message “Change filter” in line 6.
1.2.4 Menu - Settings - Temperatures 3.0
This menu is used to specify a setpoint for the room temperature (in heating operation, if a heater is
controlled via the control system).
The hysteresis for the switching processes can be changed in the system setup, but this should be left to
a specialist.
Example:
Room
: 20°C
Temperatures 3.0
Room :
→
x0°C
→
- +
TA1
TA2
TA3 TA4 TA5
Filter change 2.0
←
Interval: ->90 days
Change in->xx days
Reset - +
TA1
TA2
TA3 TA4 TA5