Patton OnSite 2701A/I, User Manual

Page: 57 / 87

Save 57
OnSite 2701A/I E1/T1 Ethernet Bridge (NTU) User Manual 7 • System Configuration
Figure 36. Updating software
Clicking on Options provides for selecting ‘Firmware Update Configuration.’ If enabled, the OnSite will pre-
vent updating with incorrect software.
Save
To save configuration changes to non-volatile memory, it is essential to click on the Save button on this web-
page. (See
figure 37 .) If you do not do this, all configuration changes are stored only in volatile memory, mean-
ing that if the OnSite is restarted, all configuration changes are lost. Click on the Save button and wait until
seeing the message “Saved information model to im.conf.”
Figure 37. Save configuration changes in non-volatile memory
Backup/Restore
You may save or use previously saved configurations from this webpage. Should you want to save a specific
application configuration from the OnSite, click on
Backup configuration to your computer .
To reload a previously saved configuration file (.icf ), browse and select the file from your computer. Click on
the Restore button to load into the OnSite. (See
figure 38 .)