Alarm
55
OnSite 2701A/I E1/T1 Ethernet Bridge (NTU) User Manual
7
• System Configuration
Alarm
Access the configuration and status of the alarms.
Figure 33. Alarm Management web-page
All OnSite devices have the ‘PP over Threshold’ and ‘NP over Threshold’ alarms. The Model 2701A has addi-
tional alarms for the T1/E1 WAN port. An alarm can be tested by clicking on the Generate button. Similarly,
by clicking on the Clear button, the alarm is cleared, that is, turned off, however the Time and Count parame-
ters remain. Only by clicking on the Reset button can you clear the alarm and reset the Time and Count
parameters. The parameter definitions are:
•
Alarm Severity: there are five categories of severity-Critical, Major, Minor, Informational, and Ignore.
•
Time: the time that the last alarm occurred.
•
Count: the number of instances the alarm has occurred.
To configure the severity of each alarm and to configure the Alarm Error Log, click on
Modify Alarms...
to reach
.)
