Patton OnSite 2701A/I, User Manual

Page: 27 / 87

Ethernet Port 27
OnSite 2701A/I E1/T1 Ethernet Bridge (NTU) User Manual 3 • Ethernet LAN Port
Figure 9. Basic Ethernet port attributes
For additional statistical parameters and a few configurable parameters, click on the hyperlink View advanced
attributes... (See figure 10 .)
Figure 10. Advanced Ethernet port attributes
The three configurable parameters are all either ‘true’ or ‘false’ (see figure 11 on page 28).
•
Auto Negotiation: the auto-negotiation can be enabled (default) or disabled. In some instances auto-negoti-
ation may be problematic if another device on the LAN does not work properly with auto-negotiation.
•
100Base Mode: the default is for 100BaseT (‘true’). To configure it for 10BaseT operation at all times, set to
‘false.’
•
Full Duplex Mode: the default value is ‘true’ for Full Duplex operation. Setting it to ‘false’ configures the
Ethernet port to operate only in half-duplex mode.